Construction Manual Transmission

Today in particular I will explain specifically about the construction of a manual transmission to vehicles, especially cars, to motorcycles in fact almost the same, there is little difference only. Before starting this discussion, you should first recognize the power transfer systems or power train, making it easier for you in understanding this material. In the car we know there are some power transfer system, namely FF, FR, RR and 4 WD. Each type uses a different transmission. For the FR vehicle (front engine, rear drive) using the transmission, while for type FR, RR and 4WD use transaxlePastinya to who are beginners in learning the transmission, confused by the second term above. I will immediately explain just about the construction of transmission and transaxle.

Transmission Construction
1. Clutch housing is a cover for the components - clutch components are mounted on the flywheel or the flywheel. In the clutch housing is also mounted components - components that drive the clutch fork (which is useful to suppress relaease bearing). Clutch housing front section attached to the machine using the connection bolts.
2. Transmission case is the house where the installation of the output shaft, counter shaft gear and the tooth - teeth other transmissions. Transmission case is filled with useful transmission oil to lubricate the rotating gear transmission and other transmission components such as bearings, etc..
3. Counter shaft and counter gear is a transmission gear arrangement which rotates to produce the ratio of teeth with a tooth - teeth the other transmission.
4. The output shaft is the transmission component that allows you to continue the rotation transmission ratio to the propeller shaft.
5. Input transmission shaft is a component that receives the round of coupling and k meneruskannay teeth - tooth transmission to change the speed and torque.
6. Gear shift is mechanisme transmission component that allows you to manage relationships tooth - teeth in the transmission that works on every level of a certain acceleration. Mechanisme Gear shift is driven by the driver via the gear lever.
7. Extension housing is a component of the transmission output shaft cover or shield from dust or dirt. Or more simply we refer to as the back cover of the transmission.
Construction transaxle
You can see that as a general construction is the same transaxle transmission, but the transaxle, there is one additional component of the differential assembly. Semuan other components are the same transaxle transmission.