Knowing in detail Radiator

Now I will explain the construction and function of the radiator is used in cooling systems. As you may know that the radiator is a place to accommodate the cooling fluid used to cool the engine. This fluid is different - there are kinds of uses special liquid cooling, but some are using water only.

The construction consists of the radiator tank top, the middle tank and the tank bottom. On tank top is a hose pipe connected to that channel water from the engine coolant. While in the middle tank terdapar cooling pipe rolling and fin are made useful to reduce the heat from the engine cooling water. This cooling water will flow on to lower radiator tank. . At the bottom of this tank there is pipe the output to be connected with hoses to the water pump. In short the flow of cooling water in the radiator is as follows: Water cooling of the engine will go through a pipe on the tank top and then fill the tank top. This cooling water will flow into the cooling pipe at the tank center to reduced temperature. Then it will enter the cooling water into the tank bottom, then sucked out of the tank bottom due to water pump (coolant pump) work.